You must have javascript enabled to use diecutting.biz !

Die Cutting: Tips And Tricks For Perfect Results

Decorating is a process of cutting materials, often using a chisel or saw, to create a desired shape. The process is important because it allows us to create a product or object in a precise, efficient manner. There are a number of tips and tricks that can help you decide in a perfect way, and these are just a few of your options,
-Use a properly maintained diecutting blade. A properly maintained blade has a sharp point, a weak point where it cannot move, and a metal layer above the cutting board. This metal layer helps to keep the blade pointed in a desired direction and stops the metal from moving during the cutting process,

Quickutz Komfy Kutz Personal Die Cutting System Hand Press Tool + Accessories

$24.99

  • type
  • Tool
  • Die Cutting
  • press
  • Does Not Apply
  • mpn
  • Tools
  • tools accessories
  • accessories


-Control the temperature of the cutting board, control the temperature of the board by using a hot wire (not heat from the equipment) and a thermostat, if the board is cool to the touch, then the temperature should be controlled by using a cool wire (not heat from the equipment),
-Use a smooth bevel. Use a smooth bevel on the cutting edge so that it is even with the blade, do not use a sharp bevel.
-Use a sharp bevel. Use a sharp bevel on the cutting edge so that it is even with the blade, do not use a beveled cutting edge.
-Do not use a jigsaw. A jigsaw can be an effective tool, but it should not be used for die cutting. A jigsaw can be used for other processes, such as cutting wood or plastic.
-Use a sandpaper-Based die cutting method. Use a sandpaper-Based die cutting method to protect the blade and paper, use a very light layer sandpaper on the blade, this prevents the metal from moving and the paper from sticking,
-Use a chisel. Use a chisel to cut through the metal layer and the paper, use a slow chisel because it is slower to move the metal, use a jigsaw on other processes, such as cutting wood or plastic.
-Use a different blade for decoding. Use a different blade for decorating every time you use the jigsaw, chisel, or chisel and chisel. This allows the blade to have a perfect shape every time,
-Use a clean cutting board. Use a clean cutting board when decoding. This helps the blade to cut into the material clean and easy,


Llama Alpaca Metal Die Cut Eline's Marianne Animals,farm,wool Cutting Dies

$18.47

  • No
  • Unknown
  • llama,alpaca,animals,zoo,farm,wool,
  • Manual
  • size approx
  • Cutting Dies
  • Card Making,Scrapbooking,Die Cutting,Embossing
  • country region of manufacture
  • product uses
  • model


Decorating is a process of creating a perfect, smooth surface by cuts made into a piece of metal, wood, or paper. There are a number of tips and tricks you can use to perfect the define and produce the perfect surface,

Cardinals Birds Metal Die Cut Impression Obsession Cutting Dies Animals Die333-h

$7.12

  • animals
  • Scrapbooking & Paper Crafts
  • die-cuts
  • United States
  • Scrapbooking
  • die cut impressions
  • Approx 1/4 to 3/4 inches
  • Holidays
  • features
  • die cuts


-Use a smooth dyeing cream or slurry to ensure smoothness,
-Use a low heat drying pan or grater to make surface-Building cuts,
-Use a smooth dyeing cream or slurry for protection during the digging process,

Quickutz Komfy Kutz Personal Die Cutting System Hand Press Tool + Accessories

$24.99

  • type
  • Tool
  • Die Cutting
  • press
  • Does Not Apply
  • mpn
  • Tools
  • tools accessories
  • accessories


-Use a gentle heat drying pan or grater to make surface-Building cuts,




Die cutting is a process of cutting materials using a sharp blade, there are a number of different tips and tricks you can use to make your die cutting process perfect, here are a few tips to get you started:
-Use a sharp blade when it matters most,

Die-namites Intricate Design Single Cutting Die ~ Bitty Peppermint ~ Dn-1234

$11.19

  • Christmas, Candy, Treat
  • theme
  • DN-1234
  • United States
  • Single Die
  • type
  • country of manufacture
  • mpn


-Keep the blade clean.
-Use a straight edge when needed.
-Don't use too much pressure on the blade,
-Don't over-Stitch.
-Use a low temperature (not too hot) when needed,
-Don't use a high temperature (not too cold) when needed,
-Don't use a high temperature (not too cold) when you need to be below the freezing point,


Stork Metal Die - Joy Crafts Cutting Dies For Announcements Congrats

$8.97

  • custom bundle
  • bundle listing
  • Manual
  • product uses
  • New
  • Unknown
  • features
  • Stork with Baby
  • country region of manufacture
  • birds animals new baby announcement shower


Directing is one of the most common and important knife skills, here are some tips and tricks for perfect results,
-Always use the correct blade for the job,
One of the important things to do when deciding is to use the correct blade for the job, keep in mind the following:
— the blade should be well-Acted (flowers in the air),
— the blade isonsiums (osmosis).

Lawn Fawn Lawn Cuts Cutting Die Scripty Merry ~ Sentiments, Card Making ~lf1267

$8.79

  • country region of manufacture
  • LF1267
  • modified item
  • custom bundle
  • handmade
  • Metal Etched, Wafer Thin Dies
  • sitewidecondition
  • model
  • Cutting Dies


— the blade is a good length for the task,



Make sure your cats are large and even,
-Use a comfortable blade.
Make sure you are using a comfortable blade,blade use is important when deciding.
-Keep a clean blade.
Keep your blade clean when decoding.
-Use a sharp blade.
Make sure your blade is sharp.
-Keep your blade clean.
Make sure your blade is clean when decoding,
-Don’t be afraid to cut samaritans.
Make sure you are able to cut samaritans,
-Use a dubbing.
Make sure you are able to cut dublins,

Seashell Crab Craft Die Cutting Dies Elizabeth Craft Designs 1751 Sea Shells New

$15.7

  • Scrapbooking_Paper Crafting_Card Making
  • Approx Largest Shell 2" x 1.5" inch
  • craft
  • Cutting Dies
  • SEASHELL & CRAB
  • 1751-SEA SHELLS
  • not included
  • type
  • model
  • theme


-Use a single-Edge blade.
Make sure you are able to cut single-Edge blades,
-Use a sharp focus.
Make sure you are able to cut sharp blades,
-Make sure your blades are well-Aligned.
Make sure your blades are well-Aligned when decoding,
-Use a new blade.
New blades are often smooth and free of any bumps, grooves, and other sharpnesses.
-Make a bevel.
Make a bevel when decoding.
-Use a sharp point.



Make sure your blade's sharpness is used.
-Make sure your blades are well-Risenced.
Make sure your blades are well-Reassessed when decoding,

There are a few tips that are specific to die cutting that can help you get your projects done the way you want, first, don’t be afraid to refer to other’s projects to get ideas. Second, have a solid plan for your pets and you want to make sure the cuts are even and the quality is what you want it to be. Finally, be patient and be sure to progress through the project until you have the desired result.

About the Author

Sally Roberts is a die cutting enthusiast who loves to experiment with new techniques and share her ideas with others. She has a blog where she shares tips and tutorials on die cutting and other papercrafting techniques.